John Lewis JLDWW 1203 - Manual (Page 16)

16
Activating rinse aid inflow when “Multi tab“
function is selected
3
If the “Multi tab“ function is not selected, the rinse
aid inflow is always activated.
If the “Multi tab“ function is selected due to the use of 3in1
detergent, the rinse aid inflow is deactivated. If the dishes
then do not dry sufficiently, you should re-activate the rinse
aid inflow (see also section “Using 3in1 detergents”).
1. Press the ON/OFF button.
3
If indicators for the programme buttons are lit, a
dishwashing cycle is activated. The dishwashing cycle
must be deselected:
Press function buttons 1 and 2 simultaneously for
approx. 2 seconds.
All additional wash programme button indicators will
go out.
2. Press function buttons 1 and 2 simultaneously and keep
them pressed.
The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 2.
The LED indicator for function button 2 will flash.
The multi-display will indicate the current setting:
4. Pressing function button 2 activates and deactivates the
rinse aid dispensing function.
5. Once the multi-display is indicating the required setting,
press the ON/OFF button. The setting is now saved.
0d
Rinse aid inflow deactivated when „Mul-
ti tab“ on (factory setting)
1d
Rinse aid inflow activated when „Multi
tab“ on