JVC CA-MXDK11 - Manual (Page 7)

4
~
AM/FM antenna
To assemble the AM loop antenna
To connect AM/FM antenna
For better FM reception
• Disconnect the supplied FM antenna, and connect to an
outdoor FM antenna using a 75 Ω wire with coaxial type
connector (IEC or DIN45325).
• Make sure the antenna conductors do not touch any other
terminals, connecting cords or the power cord. Also, keep
the antennas away from metallic parts of the System,
connecting cords, and the AC power cord. This could cause
poor reception.
Ÿ
TV/monitor
• Connect the VIDEO jack or S-VIDEO jack whichever
you want to use. If your TV is equipped with the S-
VIDEO input jack, S-VIDEO connection gives you
better quality pictures.
• To select the video output to match the color system of your
TV (PAL or NTSC), see page 6.
!
Digital audio component
• Set “DIGITAL AUDIO OUTPUT” in the “AUDIO”
preference display correctly according to the connected
digital audio equipment (see page 35).
Digital audio signals are output from this System only when
“DVD/CD” is selected as the source.
Extend it so that you can
obtain the best reception.
AM loop antenna
(supplied)
FM antenna (supplied)
Turn it until the best
reception is obtained.
AM loop antenna (supplied)
Keep it connected.
FM outdoor antenna
(not supplied)
Composite video
cord (supplied)
S-video cord
(not supplied)
Protective cap
MX_DK11.book Page 4 Wednesday, December 13, 2006 5:11 PM