JVC AV 65WP74 - Manual (Page 57)

Use either the television’s own tuner or a cable box to select channels. Set this switch to TV
to operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.
Note:
• See page 21 for information on programming your remote for cable box operation.
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Move the slide switch to
VCR or DVD to operate.
Notes:
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 22.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 23.
TV/CATV Slide Switch
VCR/DVD Slide Switch
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,
power on, and power off.
Move the selector switch to
DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 23.
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to
VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 22.
Button Functions
VCR Buttons
DVD Buttons
57
Your remote control includes illuminated buttons for key features like
C
hannel +/– and
Volume +/–. Press the light button to turn the illumination on for 4 seconds.
Light
65,56,48WP74 English OK1 2/18/03, 1:47 PM 57