JVC AV 65WP74 - Manual (Page 51)

Button Functions
51
Turns the TV on or off.
Press the P
OWER
button
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 7:
0 (Zero)
7 (Seven)
Power
Number Buttons - 10Key Pad
Use the 100+ button to directly access channels above channel 99. For example, to move to
channel 124, press 100+, 2 (Two), 4 (Four).
100+ Button
Selects the signal input source for the television: Input-1, 2, 3 or 4 for video devices like
VCR’s DVD players, or camcorders.
I
NPUT
1, 2, 3, 4
Note:
• When you return to TV mode, press the R
ETURN
+/T
V
button or direct 10 key pad.
Input
Digital-In
Use this button to directly select the digital-in input.
Press the D
IGITAL
-I
N
button
• Digital-In will display only when the 480p picture signal in Digital-In is displayed.
65,56,48WP74 English OK1 2/18/03, 1:47 PM 51