JVC AV 65WP74 - Manual (Page 28)

Initial Setup
28
Auto Tuner Setup
The auto tuner setup function is described on page 20 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
ENU
button
π† To AUTO TUNER SETUP
è To operate
è To choose CABLE or AIR
Press the O
K
button to start
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message
PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV.
You can add or delete channels from the line-up or prevent any unauthorized viewers from
watching any or all 181 channels.
Press the M
ENU
button
π† To CHANNEL SUMMARY
è To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “”. You can
delete channels from the scan by removing the “”. If any
channels were missed during auto tuner setup and you wish
to add them, you may by placing an “” next to the channel
number.
π †
è To the SCAN column
Press the O
K
button to include or delete from scan
Press the M
ENU
button when finished
You can block access to a channel by activating the channel lock.
Press the M
ENU
button
π† To CHANNEL SUMMARY
è To operate
π †
è To the Lock Column ( )
Press the Z
ERO
button to lock or unlock that channel
Press the M
ENU
button when finished
Press the Menu button when finished
65,56,48WP74 English OK1 2/18/03, 1:45 PM 28