JVC AV 65WP74 - Manual (Page 24)

Remote Programming
24
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the P
OWER
and R
ETURN
+/TV buttons. Hold for at least three seconds and release.
3) Press the P
OWER
button on the remote, and see if the cable or satellite box responds.
4) If there was a response, press R
ETURN
+/TV. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the remote control that came with your equipment.
5) Press R
ETURN
+/TV to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”
or “DVD”.
2) Press the VCR or DVD P
OWER
and R
ETURN
+/TV buttons. Hold for at least three seconds
and release.
3) Press the VCR or DVD P
OWER
button, and see if the VCR or DVD responds.
4) If there was a response, press R
ETURN
+/TV. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
5) Press R
ETURN
+/TV to exit.
Search Codes
65,56,48WP74 English OK1 2/18/03, 1:45 PM 24