JVC HM-DR10000EU - Manual (Page 59)

EN
59
Basic Connections
This is an example of basic connection if you have both
satellite tuner and decoder.
Connect the decoder to the satellite tuner's connector and AV1
IN/OUT connector to the satellite tuner's connector. Then
connect the satellite tuner and TV.
NOTES:
● To record a satellite programme which delivers the Y/C signal,
set "AV2 SELECT" to "AV2" and "AV1 SELECT" to "S-VIDEO".
You can obtain high-quality S-VHS picture.
● If you connect your recorder's S OUT and AUDIO OUT
connectors to the TV, you can enjoy high-quality S-VHS
pictures.
● Automatic Satellite Program Recording function is not
possible with this connection.
● To record a programme via the satellite tuner, select L-1 mode
by pressing NUMBER keys and/or TV PROG so that "L-1"
appears on the display panel.
● To receive a scrambled broadcast, descramble the signal with
the satellite tuner.
● For details, refer to the instruction manual for the satellite
tuner and decoder.
AV1 IN/OUT (L-1)
AV2 IN/DECODER (L-2)
DV IN
AV1 OUT
COMP. Y/C
S IN
(S-1)
S OUT
R.PAUSE
ANT. IN
ANT. OUT
R
L
AUDIO
OUT IN (S-1)
SYNCHRO EDIT
JLIP
DECODER VCR TV
Mains outlet
TV Aerial
cable
Aerial connector
Satellite Tuner Unit
Satellite Cable
Outdoor Unit
Aerial
Back of TV
21-pin AV input
connector (SCART)
RF OUT
ANT. IN
Back of Recorder
Decoder