JVC HM-DR10000EU - Manual (Page 24)

24
EN
RECORDING (cont.)
Recording
Features
Record One Programme
While Watching Another
SELECT CHANNEL TO
WATCH
1
Once recording is in progress, all you need to do is to
set the channel controls on the TV for the station you
wish to view.
● The programme selected with the TV’s channel
controls appears on the TV screen while the one
selected with the recorder's TV PROG buttons is
recorded on the tape.
● If a decoder is connected to the recorder ( ੬
pg. 60),
you can select a scrambled channel as well with the
TV channel controls.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 8 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
START RECORDING
1
Press RECORD on the recorder.
ENGAGE ITR MODE
2
Press RECORD again. " " blinks and 0:30 appears on
the front display panel.
SET RECORDING DURATION
3
If you want to record for more than 30 minutes, press
RECORD to extend the time. Each press extends
recording time by 30 minutes.
NOTE:
You can only perform ITR using the RECORD button on the
recorder's front panel.
1 2 3
4 5 6
7 8 9
1
2
1
2
3
– –:– –
0
3
4
4
TV PROG
RECORD