JVC SP-PWS9 - Manual (Page 23)

20
Playback
• The icon such as shows the types of discs/memory cards the
operation is available for.
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector
to AUDIO.
2 Press DVD or CARD depending on
which media you want to play.
7 When playing a disc
1
Press OPEN/
CLOSE.
• The system turns on and the
disc tray comes out.
• 0 on the center unit can also be used.
2
Place a disc.
3
Press 3 (play button).
7 When playing a memory card
7 While CARD is selected as the source
1
Insert the memory card until it clicks.
2
Press 3 (play button).
For MP3/WMA
The file control display (
A pg. 28) appears on the TV screen.
For JPEG
Each file (still pictures) is shown on the TV screen for about 3
seconds (slide-show). When stopping playback, the file control
display (
A pg. 28) appears on the TV screen.
For MPEG4
Pressing TOP MENU or MENU shows the file control display
(
A pg. 28) on the TV screen during playback.
7 To pause playback
Press 8.
To return to playback, press 3 (play button).
7 To stop
Press 7.
7 To remove the memory card
IMPORTANT
Make sure that the memory card playback is stopped before
removing the memory card. Otherwise the data in the card may
damaged.
7 While stopped
The buttons described below are used on pages 20 to 23.
Basic playback
AUDIO
or
OPEN/CLOSE
DVD CARD
ENTER
TITLE/GROUP
100+
FL DISPLAY
AUDIO
Remote control
mode selector
(play button)
Number buttons
When placing an 8 cm
disc
Label side up
Continued on next page
TH-S9S7[A].book Page 20 Thursday, March 18, 2004 5:02 PM