JVC CA-TD77R - Manual (Page 49)

45
English
To Turn the DAILY Timer On Again
1. Press the MENU button.
“DAILY” appears on the display and the DAILY indicator in the “TIMER” section of the menu
display blinks.
2. Press the SET button.
3. Press the ENTER button.
The DAILY indicator in the TIMER section of the menu changes from a blinking display to a steady
display. The Timer ON TIME, OFF TIME, PLAYBACK SOURCE (including the disc number and
track number if a CD source is selected), and VOLUME LEVEL are displayed on the display.
CAUTION: If the System is unplugged, or a power failure occurs, the
timer setting will be erased in a few days. If the settings are erased in
this way, reset the timer settings.
Setting the ONCE REC (Recording)
Timer
With the Recording Timer you can make a tape of a radio broadcast automatically whether or not you are
home. For the timer to work correctly, you need to make sure of the following in addition to setting the
time for the Tuner and Cassette Deck to come on:
o
You can set the ONCE REC Timer whether the Unit is on or off.
o The tape you want to record onto must be in Tape Tray.
1. Press the MENU button.
“DAILY” appears on the display and the DAILY indicator in
the “TIMER” section of the menu display blinks.
2. Press the up or down cursor key
(
¡ or 1) until “REC” blinks
on the display.
“ONCE REC” appears on the display and the REC indicator
in the “TIMER” section of the menu display blinks.
3. Press the SET button.
The display changes to the On Time display.
4. Set the On Time and Off Time
Use the 4 or ¢ key, and the SET key to set the start and end times in the same way as for the
DAILY Timer.
When you press the SET button after setting the Off Time,
“TUNER” starts to blink on the display.
5. Press the SET button.
The display changes to the preset channel selection screen.
6. Press the left or right cursor key
( 4 or ¢) to select the preset
channel you want to listen to.
You can only select a station to receive from amongst
the preset channels.
7. Press the ENTER button.
The “REC” indicator changes from a blinking display to a steady display. The ON TIME, OFF TIME,
and preset channel number are displayed then the display reverts to the previous display, before the
Timer was set.
Turn the power off if you made the timer settings with the power turned on.
o If you make a mistake while setting the Timer, press the CANCEL button to return to the previous
setting. You can use the CANCEL button to return to the On Time setting.
o A few seconds before the start time for the timer, the System automatically turns on the power and
displays “ONCE REC” and “TIMER” alternately on the display. When the set time is reached,
playback starts using the selected source. A few seconds before the end time for the timer. “TIMER”
blinks on the display and when the end time is reached the power is automatically turned off again.
o If you change the source while the ONCE REC timer is running the timer operation is cancelled.
MENU
SET
ENTER
MENU
TIMER
DAILY
TIMER
REC
SET
TIMER
REC
SET
TIMER
REC
MHz
CH
ENTER
1
2
3
5
7
1
2
3
6
CA-TD77R[EF]/EN/p26-52 97.7.24, 2:45 PM 45