JVC CA-TD77R - Manual (Page 40)

36
English
Regular Play
If the power is already on, you can use this basic procedure:
1. Press the
0 button.
“OPEN” appears on the display and the Tape Tray opens.
2. Insert a tape into the Tape Tray with
the tape head at the back.
3. Press the 0 button again.
“CLOSE” appears on the display and the Tape Tray closes.
4. Press the TAPE button.
The tape is played in the direction shown by the Tape Direction indicator.
•
If the Tape Tray is open, it automatically closes and the tape is played when you press the TAPE
button.
• If the Cassette Deck is already selected as the playback source, press the 2 or 3 button to play
the tape in that direction.
• If the Remote Control is in Cassette Deck control mode, press the 3 button on the Remote
Control to play the tape in the direction shown by the Tape Direction indicator.
To stop playing, press the 7 button on the Unit or press the 7 button on the Remote Control after
switching to Cassette deck control mode.
To remove the tape, press the 0 button. The tape automatically stops and the Tape Tray opens.
To change the direction of playback for the tape, press the 2 or 3 button. If you are using the
Remote Control, press the TAPE DIRECTION button.
Tape Direction Indicator and the Display —————————
Tape Direction indicator
The Tape Direction indicator shows you which direction the tape is being played in. The direction of
playback and the Tape Direction indicator display are shown below.
o During playback, the Tape Direction indicator blinks slowly. During fast left or fast right, the indicator
blinks quickly. During Music Scan mode, the direction indicator alternates between blinking slowly
and quickly repeatedly.
Display
The display includes a tape counter which shows you which direction a tape is being played. The tape
counter increases when the tape is playing in the
3 direction, and decreases when the tape is played in the
2 direction.
o
When the Tape Direction indicator shows 3, the counter increases when you fast forward a tape and
decreases when you rewind a tape.
When the Tape Direction indicator shows
2, the counter decreases when you fast forward a tape and
increases when you rewind a tape.
o When the Tape Direction indicator shows 3, the following happens when you do a Music Scan.
• When you scan to the next selection, the counter increases.
• When you scan to the previous selection, the counter decreases.
o When the Tape Direction indicator shows
2, the following happens when you do a Music Scan.
• When you scan to the next selection, the counter decreases.
• When you scan to the previous selection, the counter increases.
To reset the tape counter, press the COUNTER RESET button. The counter returns to “0000”.
When the indicator is 2
TAPE
When the indicator is 3
TAPE
COUNTER
RESET
CA-TD77R[EF]/EN/p26-52 97.7.24, 2:42 PM 36