5 locking filter cycles, 6 temperature setting lock, 7 programming the change filter reminder – Jacuzzi J - 400 SERIES J - 460 User Manual
Page 46: J-400 series
Page 41
J-400 Series
12.5
locking Filter Cycles
You may keep all filter cycle programs from being inadvertently altered
by electronically “locking” them.
•
To Lock All Filter Cycles: Press CYCle
button, then
within 30 seconds, press DIsPlaY
, mODe
and
warmer
buttons within five seconds each. A padlock
symbol will appear on the screen. In this state, the status of the cycle
program may be checked, but may not be altered.
•
To Unlock Filter Cycles: Press DIsPlaY
, mODe
and COOler
buttons within five seconds each.
12.6
Temperature setting lock
The spa’s temperature setting can be locked to prevent unauthorized
changes. When locked, all other spa buttons and functions remain
undisturbed.
•
To Lock Temperature Setting: Press warmer
or
COOler
button to display temperature setting, then
immediately press the DIsPlaY
, mODe
, and
warmer
buttons within five seconds each. A padlock symbol
will appear on the screen.
•
To Unlock Temperature Setting: Press warmer
or
COOler
button to display temperature setting, then
immediately press the DIsPlaY
, mODe
, and
COOler
buttons within five seconds each.
12.7
Programming the Change Filter reminder
Your new spa is equipped with a programmable “Change Filter” reminder
icon that flashes on the control panel display after a specified
number of days. It is designed to remind you to clean the skimmer
filter cartridge on a regular basis but does not affect spa operation
in any way. The “Change Filter” reminder must be reset at each
filter cleaning interval. It offers a selectable range from 10-120 days or
can be disabled (turned off). We recommend an initial setting of 60 days
(2 months) to remind you to check your filters after your first 2 months
of operation. At this time, you can easily determine whether you need to
change this interval by visually inspecting the filter cartridge an polishing
bag.
note: This reminder must be reset at each filter cleaning interval. Refer
to section 13.1 for filter cleaning instructions.
LOCKED
LOCKED
LOCKED
LOCKED