Jacuzzi J - 400 SERIES J - 460 - Manual (Page 47)

Page 42
J-400 Series
Programming Instructions
1. Press the CYCle
button 2 times. The main display reads “FIL”
indicating the “Change Filter” display program has been accessed.
2. Press seleCT button once to display the currently
programmed duration or to view days elapsed since last filter
cleaning interval.
3. Press warmer or COOler button to change duration
setting as follows:
0 - 10 - 20 - 30 - 40 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120 - OFF
note: Selecting 0 in step 3 forces the change filter reminder icon to
remain on indefinitely.
4. Press DIsPlaY
button once to save changes and return to the
standard water temperature display.
note: If no button is pressed within 30 seconds, all changes are
recorded and the screen automatically returns to the standard water
temperature display.