beautypg.com

0 operating instructions, 1 view button, 2 activate jets pump 1 – Jacuzzi J - 400 SERIES J - 460 User Manual

Page 31: 3 activate jets pump 2, 4 selecting the desired massage action, 5 light on/off button

background image

Page 26

J-400 Series

10.0 Operating Instructions

Your Jacuzzi® spa has a touch-sensitive control panel, massage

selectors, and air control knobs located on the top rim of the spa (pages

22-25). These controls let you operate many of the special functions of

your Jacuzzi spa. By familiarizing yourself with the following information,
you will be able to gain the full benefit from using your spa .

10.1

View Button

Pressing this button inverts the main four-digit display on the

command center’s LCD screen to allow easy reading from
either inside or outside the spa.

10.2

activate Jets Pump 1

The button labeled JETS 1 controls jets pump #1. Pressing this
button cycles jets pump #1 on and off.

10.3

activate Jets Pump 2

The button labeled JETS 2 controls jets pump #2. Pressing this

button cycles pump #2 on and off.

Auto Turn Off — Anytime a pump has been manually turned on, it will
automatically turn off after approximately 20 minutes. If at this time you
desire more jet operation you may simply turn the pump(s) back on.

10.4

selecting the Desired massage action

Your Jacuzzi spa is equipped to allow you to customize

the massage action you desire. Each model incorporates

a massage selector that allow you to customize the

massage and performance by diverting water between

various jet systems. Simply turn massage selector to

position A (Combo), B, or C to divert water pressure to various jet groups.

note: The massage selector valve(s) is designed to operate in positions

A (Combo), B, and C for optimum performance. It is considered normal

for sound levels within the valve to vary between positions due to the

large amounts of water flowing through it. For optimum filtration benefits,

leave the valve in position A when spa is covered. Select position B or C
for maximum jet performance during spa use.

10.5

light On/Off Button

Pressing this button activates the logo, footwell IX Jet light,

waterfall lights, cupholders and optional exterior lights in

sequence as follows: high - medium - low - off.

note: Interior lights automatically turn off after 2 hours.

B

C

A

This manual is related to the following products: