JVC HR-XVS20E - Manual (Page 13)

Masterpage:Right0
EN
13
Filename [XVS20EX_06Index.fm]
Page 13 February 10, 2003 1:07 pm
INITIAL SETTINGS
Auto Set Up
Auto Channel Set/Auto Clock Set/
Auto Guide Program Number Set
A
Turn on the unit.
Press 1 on the unit or remote control. The Country Set
display appears on the TV screen.
B
Select your country.
NOTES:
● If you have selected BELGIUM or SUISSE, go to step C.
● If you have selected MAGYARORSZÁG, CESKÁ REPUBLIKA,
POLSKA or OTHER EASTERN EUROPE, press OK. The Clock
Set screen appears. Set the clock manually (
੬
pg. 84), then
go to step D.
● If you have selected any other country name, go to step D.
After the 1 button on the unit or remote control is pressed
for the first time to power on the unit, by simply selecting
your country*, the Auto Set Up function sets the tuner
channels, clock** and Guide Program numbers
automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
** If you live in Hungary (MAGYARORSZÁG), Czech Republic
(CESKÁ REPUBLIKA), Poland (POLSKA) or other countries in
Eastern Europe (OTHER EASTERN EUROPE), set the clock
manually.
Before starting, make sure of the following:
● The TV aerial cable should be connected to the unit.
● The unit’s mains power cord should be connected to a
mains outlet.
● The TV should be set to its AV mode (with AV connection
੬
pg. 12) or UHF channel 36 (with RF connection
੬
pg. 12).
● Slide the TV/S-VHS/DVD switch to the right.
NOTE:
If you have connected your TV to
the unit with RF connection and
the on-screen display appearing
on UHF channel 36 looks
distorted, perform “Video
Channel Set” on page 86.
Press rt to move the
highlight bar (pointer) to your
country’s name.
(Example) DEUTSCHLAND is
selected.
XVS20EX_01.book Page 13 Monday, February 10, 2003 1:07 PM