JVC 3834RP0093F - Manual (Page 26)

26
Operation with DVD and Video CD
Playing a DVD and Video CD
Playback Setup
Turn on the TV and select the video input source
connected to the DVD with no label player.
Audio system: Turn on the audio system
and select the input source connected to the
DVD player.
11 Press OPEN/CLOSE to open the disc tray.
2 2 Load your chosen disc in the tray, with the label
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing down.
3 3 Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY 2
2.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
Use the 1 1 2 2 3 3 4 4 buttons to select the title/chapter
you want to view, then press OK to start playback.
Press TITLE or DVD MENU to return to the menu
screen.
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
20.
Notes
If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see “
Parental Control”, on page 21).
DVDs may have a region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
To watch a DVD during timer recording standby
mode, press POWER and VCR/DVD to switch to
DVD mode.
General Features
Note
Unless stated otherwise, all operations
described use the remote control. Some
features may also be available on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY when playback is stopped, then
press the appropriate numbered button (0-9) to
select a title number.
Moving to another CHAPTER/TRACK
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press SKIP/INDEX . or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press SKIP/INDEX . twice briefly to step back to
the previous chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3
3/4 4 to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
buttons (0-9).
Note
For two-digit numbers, press the buttons in rapid
succession.
Slow Motion
1 Press SKIP/INDEX . or > during pause.
The player will enter SLOW mode.
2 Use the SKIP/INDEX . or > to select the
required speed: t 1/16, t 1/8, t 1/4 or t 1/2
(backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (for-
ward).
3 To exit slow motion mode, press PLAY 2 2.
Note
Slow motion playback in reverse is not applicable for
Video CD.
VCD1.1 VCD2.0 DVD
1/3 1/12 VCD1.1 DVD
1/3 DVD
VCD2.0
DVD
VCD1.1 VCD2.0 DVD