JVC XL-MV35TN - Manual (Page 13)

Page 9
English
XL-MV35TN
LVT0023-001A
[ U, UF ]
PHONES
BASIC OPERATIONS
Using the remote control
Presetting the remote control to operate
your own TV
You can use the Player’s remote control unit to control some functions
on your TV set (e.g., turning the TV on and off, adjusting volume, or
selecting channels). First, though, you must preset the remote control
to make it compatible with your TV.
Operation
1. Check the Preset Code Table (page 10) to determine the two-
digit brand code number for your TV.
2. While holding down the TV/VIDEO/SPATIALIZER button on the
remote control, press the Number keys to insert the two-digit
brand code number. (For example, if the code number is "28",
press Number key 2, then 8. If the first digit is a "0", press 10.
Thus, if the code number is "09", press Number key 10, then 9.
If the code number is "10", press Number key 1, then 10. If it
is "20", press Number key 2, then 10.)
Notes
•
Before the remote control unit leaves the factory, the brand code
number is set as No. 01 (JVC).
• Depending on your television set’s age and other factors, brand
code numbers may be different from those shown in the table. In
such a case, try out other codes until you find one that corresponds
to your television.
3. While still holding down the TV/VIDEO/SPATIALIZER button,
press the STOP button on the remote control.
4. The TV is turned off if the code number is correct. Repeat the
procedure from the beginning if you weren’t successful the
first time.
TV/VIDEO
SPATIALIZER STOP
Using stereo headphones
Connecting stereo headphones
Connect stereo headphones to the PHONES jack at the lower-left of
the front panel. The volume level is fixed and cannot be adjusted.
+