JVC LVT1774-001A - Manual (Page 82)

ENGLISH
82
Video input
You can connect an external component to the VIDEO IN plug.
Preparation:
When connecting a video component
Make sure Ext Input is selected for the external input setting, and Video for the video input
setting. (☞ [93])
• You cannot view the video picture when the parking brake is not engaged.
When connecting a camera
Make sure Camera is selected for the video input setting. (☞ [93])
Each time you press DISP, the display switches as follows:
AV screen
= Vehicle information (☞ [11]) = Video picture or camera picture = (Back to the AV
screen)
For video components:
Turn on the connected component and start playing.
To switch to the camera view automatically
You can set the unit to automatically display
the camera view when the car is put into reverse
gear or when the car slows down.
☞ [94] Interlock
To reverse the camera picture
☞ [94] Horizontal and Vertical
KDNXD505_J_eng.indb 82 KDNXD505_J_eng.indb 82 07.6.25 4:13:53 PM 07.6.25 4:13:53 PM