JVC GR-D22 - Manual (Page 6)

EN
6
Automatic Demonstration takes place when
“DEMO MODE” is set to “ON” (factory-preset).
Ⅲ Automatic Demonstration starts when there is no operation for
about 3 minutes after the Power Switch r is set to “ ” or “ ”
and no cassette is in the camcorder.
Ⅲ Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will resume.
Ⅲ “DEMO MODE” remains “ON” even if the camcorder power is
turned off.
Ⅲ To cancel Automatic Demonstration:
1. Set the Power Switch r to “ ” while pressing down the Lock
Button e located on the switch and press the MENU/VOLUME
wheel # in. The Menu Screen appears.
2. Rotate the MENU/VOLUME wheel # to select “ (SYSTEM)”
and press it.
3. Rotate the MENU/VOLUME wheel # to select “DEMO MODE”
and press it. The Sub Menu appears.
4. Rotate the MENU/VOLUME wheel # to select “OFF” and press
it.
5. Rotate the MENU/VOLUME wheel # to select “ RETURN”,
and press it twice. The normal screen appears.
NOTE:
If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on
the LCD monitor or viewfinder.
AUTOMATIC DEMONSTRATION
None
RETURN
OF F
ON
EMO MODE D –
S Y S TEM
r
#
e
Sub Menu
GR-D22_1-10_EN 25/9/03, 3:23 PM 6