beautypg.com

JVC GR-D22 User Manual

Page 38

background image

EN

38

INDEX

WARNING INDICATIONS

(high)

(exhausted)

Displays the battery remaining power level. As the
battery power comes close to nil, the battery indicator

blinks (battery power warning). When the battery

power is exhausted, power turns off automatically.

Appears when no tape is loaded.

(

pg. 9)

CHECK TAPE’S ERASE PROTECTION TAB

Appears when the erase protection tab is set to “SAVE”
while the Power Switch

r

is set to “

” or “

”.

(

pg. 9)

HEAD CLEANING REQUIRED USE CLEANING

CASSETTE

Appears if dirt is detected on the heads during
recording or playback. Use an optional cleaning
cassette.

(

pg. 33)

CONDENSATION, OPERATION PAUSED

PLEASE WAIT

Appears if condensation occurs. When this indication is
displayed, wait more than 1 hour until condensation
disappears.

TAPE!

Appears if a tape is not loaded when the Recording
Start/Stop Button

)

or SNAPSHOT Button

$

is

pressed while the Power Switch

r

is set to “

” or

”.

TAPE END

Appears when the tape ends during recording or
playback.

SET DATE/TIME!

• Appears when the date/time is not set.

(

pg. 10)

• Appears when the built-in clock battery runs out and

the previously set date/time is erased. Consult your
nearest JVC dealer for replacement.

LENS CAP

Appears for 5 seconds after power is turned on if the
lens cap is attached.

E01, E02 or E06 UNIT IN SAFEGUARD MODE
REMOVE AND REATTACH BATTERY

The error indications (E01, E02 or E06) show what type
of malfunction has occured. When an error indication
appears, the camcorder turns off automatically.
Remove the power supply (battery, etc.) and wait a few
minutes for the indication to clear. When it does, you
can resume using the camcorder. If the indication
remains, consult your nearest JVC dealer.

E03 or E04 UNIT IN SAFEGUARD MODE EJECT
AND REINSERT TAPE

The error indications (E03 or E04) show what type of
malfunction has occured. When an error indication
appears, the camcorder turns off automatically. Eject
the cassette once and re-insert it, then check if the
indication clears. When it does, you can resume using
the camcorder. If the indication remains, consult your
nearest JVC dealer.

GR-D22_29-40_EN

25/9/03, 3:34 PM

38