JVC GR-D22 - Manual (Page 28)

EN
28 SYSTEM CONNECTIONS
To DV
0
DV cable
(optional)
To DV
connector
PC with DV connector
Core filter
Core filter
Connection To A Personal Computer
It is possible to transfer video to a PC with a DV
connector by using software equipped with the PC or
commercially available software.
1
Make sure the camcorder and PC are turned off.
2
Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
3
Turn the camcorder’s Power Switch r to “PLAY”
while pressing down the Lock Button e located on the
switch and turn on the PC.
• Refer to the instruction manual of the software on how
to transfer video to the PC.
4
When finished, turn off the PC first, then the
camcorder.
NOTES:
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
੬
pg. 7).
● The date/time information cannot be captured into the
PC.
● Refer to the instruction manuals of the PC and Software.
● The still images can also be transferred to a PC with a DV
connector-equipped capture board.
● When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable depend-
ing on the type of DV connector (4 or 6 pins) on the
PC.
● The system may not work properly depending on the PC
or capture board you are using.
● When using the DV connection refer to manufacturer
instructions of your capture board for driver’s installation
and operation instructions.
GR-D22_16-28_EN 25/9/03, 3:32 PM 28