JVC GET0570-001A - Manual (Page 97)

ENGLISH
19 SETTINGS
Setting menu ( : Initial)
AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with...
OFF:
No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth device
found at first.
AUTO ANSWER
Only for the device being connected for “BT-PHONE.”
ON:
The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls manually.
REJECT: The unit rejects all incoming calls.
MSG INFO (message info)
Only for the device being connected for “BT-PHONE.”
AUTOMATIC: The unit informs you of the arrival of
a message by ringing and displaying
“RCV MESSAGE” (receiving message).
• The display illuminate in blue (see
“ RING COLOR” on page 21).
MANUAL: The unit does not inform you of the
arrival of a message.
MIC SETTING (microphone setting)
Only for the device being connected for “BT-PHONE.”
Adjust microphone volume connected to the Bluetooth
adapter, [LEVEL 01/02/03].
VERSION
The Bluetooth software and hardware versions are
shown.
You can change the settings listed on the right column
according to your preference.
1
Select “BT-PHONE” or “BT-AUDIO.”
2
Enter the Bluetooth menu.
3
Select “SETTINGS.”
4
Select a setting item.
* 1 Appears only when a Bluetooth phone is
connected.
* 2 Appears only when a Bluetooth phone is
connected and it is compatible with text message
(notified through JVC Bluetooth adapter).
* 3 Bluetooth Audio: Shows only “Version.”
5
Change the setting accordingly.
Bluetooth settings
EN16-21_KD-R406_001A_5.indd 19 EN16-21_KD-R406_001A_5.indd 19 22/8/08 2:43:40 PM 22/8/08 2:43:40 PM