Listening to the radio, When an fm stereo broadcast is hard to receive – JVC GET0570-001A User Manual
Page 50
8
Listening to the radio
1
Select “FM” or “AM.”
2
Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until “M” flashes on the display,
then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, “ST”
lights up on the display.
When an FM stereo broadcast is
hard to receive
• See also page 21.
Reception improves, but stereo effect will be lost.
• “MO” lights up on the display.
To restore the stereo effect, repeat the same
procedure to select “
MONO OFF.” The MO indicator
goes off.
Select “
TUNER”
=
“
MONO”
=
“
MONO ON”
FM station automatic presetting
— SSM (Strong-station Sequential
Memory)
You can preset up to 18 stations for FM.
1
While listening to a station...
2
Select the preset number range you want to
store.
3
Local FM stations with the strongest signals are
searched and stored automatically.
To preset other 6 stations, repeat from step
1 again.
[Turn]
=
[Press]
EN02-09_KD-R404[UI]_1.indd 8
EN02-09_KD-R404[UI]_1.indd 8
8/9/08 12:03:23 PM
8/9/08 12:03:23 PM