JVC GET0570-001A - Manual (Page 63)

21 SETTINGS
Continued on the next page
Category Menu items Selectable settings, [reference page]
TUNER
MONO * 3
Monaural mode
• MONO ON
• MONO OFF
: Activate monaural mode to improve FM reception, but stereo
effect will be lost, [8].
: Restore the stereo effect.
IF BAND
Intermediate
frequency band • AUTO
• WIDE
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
COLOR
COLOR 01
– COLOR 29,
USER : Select one of the preset or user color for display and button (except EQ/
/ 0 ) illumination.
(See also page 23 for USER color setting.)
MENU COLOR
MENU COLOR
Menu color • OFF
• ON : Cancels.
: Changes the display and button (except EQ/
/
0
)
illumination during menu, list search and playback mode
operations.
RING COLOR
RING COLOR * 4
Ring color
• OFF
• ON : Cancels.
: When a call comes in, the display will flash in blue.
• The display will change to the original color when the call is
answered or the incoming call stops.
When the unit receive a text message, the display only
illuminate in blue.
AUDIO
FADER * 5
Fader
R06 – F06 : Adjust the front and rear speaker output balance.
[Initial: 00]
BALANCE * 6
Balance
L06 – R06 : Adjust the left and right speaker output balance.
[Initial: 00]
LOUD
Loudness • LOUD OFF
• LOUD ON : Cancels.
: Boost low and high frequencies to produce a well-balanced
sound at a low volume level.
VOL ADJUST
Volume adjust VOL ADJ –05
—
VOL ADJ +05
[Initial:
VOL ADJ 00] : Preset the volume adjustment level of each source (except
FM), compared to the FM volume level. The volume level will
automatically increase or decrease when you change the source.
• Before making an adjustment, select the source you want to
adjust.
• “VOL ADJ FIX” appears on the display if “FM” is selected as the
source.
* 3 Displayed only when the source is “FM.”
* 4 Displayed only when Bluetooth adapter, KS-BTA200 is connected.
* 5 If you are using a two-speaker system, set the fader level to “00.”
* 6 This adjustment will not affect the subwoofer output.
EN16-21_KD-R404[UI]_1.indd 21 EN16-21_KD-R404[UI]_1.indd 21 8/9/08 12:04:53 PM 8/9/08 12:04:53 PM