John Lewis JLDWW 905 - Manual (Page 10)

1. On/Off indicator light
2. On/Off buton
3. Function buttons
In addition to the dishwashing programme selected, the following
functions can also be set with the help of these buttons:
- the setting of the water softener,
- activation/deactivation of the rinse aid dispenser,
- the cancelling of a programme in progress.
4. Programme selection buttons
The selection of a washing programme occurs by pressing one of
these buttons (see "Washing programmes chart" see page 20).
5.The digital display indicates:
- the level of hardness to which the water softener is set,
- if the rinse aid dispenser is activated/deactivated,
- the approximate remaining time of the running programme,
- the end of the programme (a zero will appear in the digital
display),
- the countdown of the delay start,
- fault codes concerning malfunction of the dishwasher.
6. Programme time indicator light
Illuminates with a back light when a washing programme has been
set and remains illuminated until the appliance is switched off.
When delay start has been set, this indicator light turns off and
will illuminate once the countdown has elapsed and the washing
programme has started.
7. Programme phase indicator lights
As soon as you select a washing programme, the phase indicator
lights foreseen for that programme will start flashing.As the
programme starts, the phase indicator lights will turn off except
for the indicator light of the phase in progress which will remain
lit with a static light.
8. Control indicator lights
The salt and rinse aid indicator lights are never illuminated while
a washing programme is running even if filling with salt and rinse
aid is necessary.
9. Delay start button
This option allows the start of the programme to be delayed
from 1 to 19 hours.
The Control Panel
10
1
3
2
4
5 6
7
8
9
10
11
Salt: salt refilling indicator light,
illuminates when the salt has run out
Rinse aid rinse aid refilling indicator light,
illuminates when the rinse aid has
run out
Washing: illuminates when the washing and
rinsing phases are running.
Drying: illuminates when the drying phase
is running.
End of cycle illuminates when the washing
programme has ended.