beautypg.com

Climate control 5-9 – Jaguar X-Type JJM 21 02 20/15 User Manual

Page 113

background image

Climate control 5-9

Windscreen defrost/demist

Frost and heavy misting

To remove frost or heavy

misting from the

windscreen, press the

DEF button.
• The fan switches on automatically at

maximum speed but the speed can be

reduced manually if required.

• Air conditioning switches on

automatically and cannot be

deselected.

• Recirculation is cancelled and cannot

be selected.

• The front screen heater and the rear

screen heater/door mirror heaters

switch on automatically, provided the

engine is running.

To deselect defrost mode, press AUTO

(recommended operating mode).

Light misting

To prevent or remove light

windscreen misting, select

manual air distribution to

windscreen and feet. See page 5-10.

Heated screens and door
mirrors

The front (F) and rear (R)

screen heaters may be

switched on and off in

any mode, including system off, but only

operate when the engine is running.

The door mirror heaters are also

controlled by the rear screen heater

button.
The front screen heater switches off

automatically after 3 minutes. The rear

screen and door mirror heaters switch off

automatically after 6 minutes.
The windscreen heaters may be manually

deselected during the time out period

using the push buttons.
In cold ambient conditions, at the start of

a journey, the front and rear screen

heaters will switch on automatically for

the time out period.

Air conditioning

Press to switch the air

conditioning on or off.
The air conditioning system is

controlled automatically in AUTO mode.

Deselecting A/C cancels AUTO mode.
The air conditioning system is also

switched on automatically in defrost

mode (DEF) but cannot be deselected.

Fan speed

Set the fan speed as required

with the rotary control knob.

Fan speed is shown as a series of

bars on the LCD screen.

When operating in AUTO mode, fan

speed is controlled automatically (but not

displayed) and any adjustment of the

knob will cancel AUTO mode.
Note: In AUTO mode, the fan only

operates at low speed, if heating is

required, until the engine is warm.