Jensen vm9311ts - Manual (Page 6)

2
VM9311TS
WARNING! The monitor employs an automatic
motorized mechanism. To prevent damage to the
core mechanism, please do not push, pull or
swivel the monitor manually.
Optional Accessories
Terk iAUX 3 READY (Sold Separately)
• Can connect to any portable media device or multimedia
device using a standard 3.5mm plug.
• Converts 3.5mm auxiliary input to RCA stereo outputs for
easy connection to the radio’s auxiliary inputs.
Jensen NAV100 GPS Navigation (Sold Separately)
•
Connects via A/V Inputs
Disconnecting the Battery
To prevent a short circuit, be sure to turn off the ignition and
remove the negative (-) battery cable prior to installation.
NOTE: If the VM9311TS is to be installed in a car
equipped with an on-board drive or navigation
computer, do not disconnect the battery cable. If
the cable is disconnected, the computer memory
may be lost. Under these conditions, use extra
caution during installation to avoid causing a
short circuit.