JVC Everio GZ-MG465 - Manual (Page 168)

16
Be sure to confi gure the following three
settings before use.
Charging the Battery Pack
1
Close the LCD monitor to turn off the
camera.
2
Attach the battery pack.
Slide the battery pack down until it locks
in place.
Bottom of the Camera
BATT.
3
Connect the AC adapter.
• The charge lamp blinks to indicate charging
has started.
• When the lamp goes out, charging is
fi nished. Unplug the AC adapter from the
AC outlet and disconnect the AC adapter
from the camera.
To detach the battery pack
Slide and hold BATT. ( ੬ step 2), then
remove the battery pack.
To check the remaining battery power
See page 18.
NOTES
• You can also use the camera with just the
AC adapter.
• Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
Necessary Settings before Use
DC Jack
AC Adapter
To AC Outlet
(110V to 240V)