JVC Everio GZ-MG465 - Manual (Page 122)

46
Using a VCR/DVD Recorder to Dub
Files from the Camera
Preparation:
• Set [SWITCH TO ANALOG I/O] to
[OUTPUT]. (Factory-preset = [OUTPUT])
(
੬ pg. 63)
• Turn off all units.
You can also connect the cables using the
jacks on the Everio dock connectors. The
S-Video or DV cable (optional) enables even
higher dubbing quality. (
੬ pg. 10) When other
devices such as a DVD burner are connected
to the Everio dock, turn the power of these
devices off.
1
Set the VCR/DVD recorder to its AUX
input mode.
2
Start playback on the camera.
• To play back videos ( ੬ pg. 27)
• To play back playlists (“When dubbing
playlists using a VCR/DVD recorder”
੬ pg. 37)
3
At the point you want to start
dubbing, start recording on the VCR/
DVD recorder.
Refer to the VCR/DVD recorder’s
instruction manual.
To stop dubbing
Stop recording on the VCR/DVD recorder,
then press the START/STOP button again.
NOTE
To record only the date information among the
display indications, set [DISPLAY ON TV] to
[ON], and touch the OK button until date/time
indication appears. (
੬ pg. 65)
Copying Files
(Continued)
AC Adapter
To AC
Outlet
DC Jack
AV Jack
AV Cable
AV Input Jack
VCR/DVD Recorder