Date/time, Pg. 35), Ard) (in order of quality) – JVC GR-D370AH User Manual
Page 35: Pg. 35), still images are recorded both on, Pg. 35, 36)
EN
35
MENUS FOR DETAILED ADJUSTMENT
MasterPage: Start_Right
ADV
ANCED FEA
TURES
DISPLAY
●
The following menu settings can be changed only
when the Power Switch is set to “REC”.
●
The DISPLAY settings except “BRIGHT” and
“LANGUAGE” are effective only for shooting.
[ ] = Factory-preset
੬ pg. 18, “Brightness Adjustment Of The
Display”
੬ pg. 17, “Date/Time Settings”
ENGLISH / FRANÇAIS / DEUTSCH /
ESPAÑOL / ITALIANO / NEDERLANDS /
PORTUGUÊS /
РУССКИЙ /
/
/
B.MELAYU /
/
/ [
] /
The language setting can be changed.
(
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
●
The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote
control. (
LCD: Keeps the camcorder’s display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV]: Makes the camcorder’s display
appear on screen when the camcorder is
connected to a TV.
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording.
OFF: Automatic demonstration will not take
place.
[ON]: Demonstrates certain functions such as
Wipe/Fader and Effects, etc., and can be used to
confirm how these functions operate.
Demonstration starts in the following cases:
●
When the Menu Screen is closed after “DEMO
MODE” is turned “ON”.
●
With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the Power
Switch is set to “REC”.
●
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
●
If a cassette is in the camcorder, the
demonstration cannot be turned on.
●
“DEMO MODE” remains “ON” even if the
camcorder power is turned off.
DSC
[ ] = Factory-preset
[FINE] / STANDARD
The Picture Quality mode can be selected to
best match your needs. Two Picture Quality
modes are available: FINE (
) and
STANDARD (
) (in order of quality).
NOTE:
The number of storable images depends on the
selected picture quality as well as the composition
of the subjects in the images and the type of
memory card being used. (
[
(TAPE)]: When Snapshot recording is
performed with the VIDEO/MEMORY Switch set
to “VIDEO”, still images are recorded only onto
the tape.
/
(TAPE/CARD): When Snapshot
recording is performed with the VIDEO/
MEMORY Switch set to “VIDEO”, still images
are recorded not only onto the tape but also in
the memory card (640 x 480 pixels).
BRIGHT
CLOCK ADJ.
LANGUAGE
DATE/TIME
ON SCREEN
TIME CODE
DEMO MODE
DEMO
QUALITY
REC SELECT
GR-D370AH_EN.book Page 35 Monday, April 17, 2006 2:24 PM