JVC GR-D370AH - Manual (Page 17)

EN
17 GETTING STARTED
MasterPage: Start_Right
GETTING ST
AR
TED
The language on the display can be changed.
(
੬ pg. 32, 35)
1
Set the Power Switch to “REC” while pressing
down the Lock Button located on the switch.
2
Open the LCD monitor fully. ( ੬ pg. 20)
3
Set the recording mode to “ M”. (੬ pg. 16)
4
Press MENU. The Menu Screen appears.
5
Press 4, 3, 1 or 2 to
select “ ᝗ΰඊ౐ ”
(DISPLAY), and press
SET . The ᝗ΰඊ౐
(DISPLAY) Menu appears.
6
Press 4 , 3 , 1 or 2 to
select “LANGUAGE”, and
press
SET .
7
Press 4 or 3 to select
the desired language,
and press
SET or 2 .
● Press 1 whenever you
want to return to the
previous menu screen.
8
Press MENU . The
Menu Screen closes.
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. (
੬ pg. 35, 36)
1
Perform steps 1 – 5 in “Language Settings”
on the left column.
2
Press 4 , 3 , 1 or 2 to
select “CLOCK ADJ.”, and
press
SET . The date
display format is
highlighted.
3
Press 3 or 4 to select
the desired date display
format, then press
SET or 2 . Select from
“MONTH.DATE.YEAR”, “DATE.MONTH.YEAR”
or “YEAR.MONTH.DATE”.
4
Press 3 or 4 to select the time display
format, then press SET or 2 . Select from “24h”
or “12h”.
5
Set the year, month, date, hour and minute.
Press 3 or 4 to select the value, then press SET
or 2 . Repeat this step until you have input all the
settings.
NOTE:
Press 1 to return to the previous setting.
6
Press MENU .The Menu screen closes.
Language Settings
LANGUAGE
0001
DEMO
Date/Time Settings
M NTH
1 2
7
0
0 : 0 5
6 2 006
AM
1 2h
. .
DATE YEAR . . O
CLOCK ADJ .
GR-D370AH_EN.book Page 17 Monday, April 17, 2006 2:24 PM