On-screen message (hdd & dvd deck only) – JVC ShowView LPT1100-001A User Manual
Page 84
Filename [DX5SEU_13Subsidiary.fm]
Masterpage:Left+
84
EN
TROUBLESHOOTING
Page 84Thursday, 1 September 2005 13:26
On-screen Message (HDD & DVD Deck Only)
●
A disc that is not registered in the library has been inserted.
Register the disc as necessary. (A pg. 54)
●
Appears when a title that has been selected in the library is not
contained in the loaded disc.
●
Recording and/or editing cannot be performed.
●
The number of titles exceeds 99.
●
The number of play lists exceeds 99.
●
To set the timer programme, the clock must be set in advance.
(A pg. 77)
●
You can programme this unit to timer record as many as 16
programmes. To programme more, you need to cancel a timer
programme already set. (A pg. 47)
●
Operation has been attempted when a disc is not loaded, or
loaded upside down. (A pg. 8)
●
When a playback-only disc or a finalised disc is loaded,
R has
●
An invalid S
HOW
V
IEW
number has been input. (A pg. 44)
●
To set the timer programme using the S
HOW
V
IEW
system, the
Guide Programme Number must be set in advance. (A pg. 74)
●
Appears when you tried to input a S
HOW
V
IEW
number during
timer recording or instant timer recording.
●
A disc loaded cannot be played back on this unit since the region
number of the disc does not match that of the unit. (A pg. 6)
●
When an incompatible disc is loaded,
I has been pressed.
●
Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (A pg. 9, 78)
●
Finalising is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (A pg. 9, 79)
●
Cancelling disc finalisation is not complete since the disc may be
dirty or damaged. Take out the disc, clean it and retry. (A pg. 9,
79)
●
During Live Memory playback,
o has been pressed. (A pg. 42)
●
Timer recording has finished during Live Memory playback.
●
Timer recording finished during Live Memory playback, then the
next timer recording is about to begin while playback continues.
●
An attempt has been made to record copy-protected contents.
●
An attempt has been made to record copy-once contents on a
disc that is not CPRM compatible, such as DVD-R.
●
The unit has detected invalid contents at the start or in the middle
of playback.
●
An attempt has been made to start DV dubbing when a digital
video camera is not properly connected to the unit.
●
Check the connection. (A pg. 59)
DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?
INSERT DISC XXXX
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES
SET CLOCK BEFORE TIMER PROGRAMMING
PROGRAMME FULL
DELETE UNWANTED TIMER PROGRAMMES
DISC NOT LOADED
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
SHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRY
GUIDE PROGRAM IS NOT SET
SET GUIDE PROGRAM THEN RETRY
CAN NOT SET SHOWVIEW TIMER PROGRAMMING DURING
TIMER RECORDING OR INSTANT TIMER RECORDING
REGION CODE ERROR
CHECK DISC
UNREADABLE DISC
CHECK DISC
COULD NOT FORMAT THE DISC
CHECK THE DISC
CAN NOT FINALISE THIS DISC
CAN NOT CANCEL FINALISATION OF THIS DISC
PRESS [STOP] AGAIN TO STOP RECORDING
TIMER RECORDING COMPLETED
PLAYBACK WILL STOP
THEN TIMER RECORDING WILL START
COPY PROHIBITED
CAN NOT RECORD
COPY PROHIBITED
CAN NOT PLAY
THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT
RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY
AND POWERED ON
DX5SEU_00.book Page 84 Thursday, September 1, 2005 1:26 PM