Discs for playback only, Unplayable discs, Region number – JVC ShowView LPT1100-001A User Manual
Page 6
Filename [DX5SEU_04DiscInfo.fm]
Masterpage:Left+
6
EN
DISC INFORMATION
Page 6Thursday, 1 September 2005 13:26
Discs For Playback Only
You can use discs with the following logos for playback only.
●
Playback may not be performed depending on the characteristics
and condition of the disc used.
●
DTS Audio CDs can also be played back (An optional DTS
decoder is required).
●
MP3 and JPEG discs can be played back on this unit only when
they have been recorded in the ISO9660 or Joliet format and
finalised.
●
JPEG files that can be played back on this unit must conform to
JFIF/Baseline process, and the maximum resolution of a JPEG
file is 2,812 pixels in width and 2,112 pixels in height.
●
CD-R/RW discs recorded in music CD format need to be finalised
to play back on this unit.
●
Operation and audio quality of this unit are not guaranteed for
discs that do not conform to the Compact Disc specification
(CD-DA).
Before you play back a CD, check for the CD logo and read the
notes on the package to confirm that it conforms to the Compact
Disc specification.
●
Depending on the intentions of the author of the software,
recording conditions of DVD discs and Video CD/SVCD discs
may be restricted. Since this unit plays back discs according to
the intentions of the author of the software as indicated on the
disc, some functions may not operate as commanded.
●
When switching from the first layer to the second layer of double-
layered DVD VIDEO discs, the image and sound may be
momentarily distorted. This is not a malfunction.
●
DVD-AUDIO discs compatible with DVD video players can be
played.
●
Super Audio CDs (SACD) compatible with conventional CD
players can be played.
Unplayable Discs
The following types of discs cannot be played using this unit.
Do not attempt to play back any kind of disc that is damaged
(cracked, warped, or repaired with adhesive tape) or discs in
unusual shapes (heart-shaped, octagonal, or other forms). If such
discs are accidentally played back, it may cause noise that can
lead to speaker damage.
●
CD-ROM discs (including PHOTO-CD and CD-G)
●
Discs recorded in Packet Write (UDF) format
●
1.3-GB double density CDs (DDCD)
●
High density CDs (HDCD)
The following discs also cannot be played back.
●
Discs of a region number other than
A2B
●
DVD-RAM (2.6 GB/5.2 GB)
●
DVD-RAM (TYPE1)
Caution for DualDisc playback
The Non-DVD side of a
ADualDiscB does not comply with the
ACompact Disc Digital AudioB standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may not be recommended.
Region Number
The world is divided into 6 regions for DVD VIDEO discs.
DVD VIDEO discs are assigned a region number to indicate which
region they may be played back in. A disc cannot be played back
on this unit unless the region number of the disc matches that of
the unit. The region number for this unit is
A2B. Only discs whose
region number includes
A2B or AALLB can be played back such as
shown below.
Examples of DVD VIDEO labels which can be played back
using this unit.
Marks of discs in this instruction manual
DVD VIDEO
Video CD/Super Video CD
Audio CD
CD-DA files
CD-R
CD-DA/JPEG/
MP3/WMA files
CD-RW
CD-DA/JPEG/
MP3/WMA files
CD-ROM
JPEG/MP3/
WMA files
(example of region code
indications)
Allows operation with a
DVD-RAM disc.
Allows operation with a
Video CD/Super Video
CD (SVCD) disc.
Allows operation with a
DVD-R disc.
Allows operation with
an Audio CD disc.
Allows operation with a
DVD-RW disc.
Allows operation with a
disc including MP3
files.
Allows operation with a
DVD VIDEO disc.
Allows operation with a
disc including JPEG
files.
DX5SEU_00.book Page 6 Thursday, September 1, 2005 1:26 PM