beautypg.com

Recording (a pg. 45), Vps/pdc indicator a pg. 45, A pg. 45 – JVC ShowView LPT1100-001A User Manual

Page 45: A pg. 45, avps/pdc recordingb), A pg. 45, aweekly/daily recordingb), Weekly/daily recording, Vps/pdc recording

background image

Masterpage:Right+

EN

45

Filename [DX5SEU_10Timer Recording.fm]

TIMER RECORDING ON HDD/DVD DECK

Page 45Thursday, 1 September 2005 13:26

Weekly/Daily Recording

You can record programmes with one of the following weekly/daily
timer settings.

For the HDD deck
When you select a mode other than ONCE, the space on the hard
disk drive is saved for new recordings by overwriting previous
recordings. To prevent loss of a needed recording, backup
programmes you wish to save by dubbing them to DVD discs
before overwriting previous recordings. Or save the title of weekly/
daily programmes to avoid overwriting of a previous week/day.
(A pg. 47)

ONCE

(One Time Recording)

In this mode a programme will not be automatically overwritten.

WEEKLY (OVERWRITE)

(Weekly Recording/Weekly Overwrite)

When the set weekly programme is broadcast, the programme
recorded last week is automatically deleted and overwritten by
the new programme. Save the title of each programme you wish
to save, then the recorded programme is saved and will not be
overwritten by the new programme.

MON-SUN (FOR A WEEK)

/

MON-SAT (FOR A WEEK)

/

MON-FRI (FOR A WEEK)

(Daily Recording/Weekly Overwrite)

When the set weekly programme is broadcast, the programme
recorded on the same day last week is automatically deleted
and overwritten by the new programme. Save the title of each
programme you wish to save, then the recorded programme is
saved and will not be overwritten by the new programme.

MON-SUN (OVERWRITE)

/

MON-SAT (OVERWRITE)

/

MON-FRI (OVERWRITE)

(Daily Recording/Daily Overwrite)

When the set daily programme is broadcast, yesterday’s
programme is automatically deleted and overwritten by the new
programme. Save the title of each programme you wish to save,
then the recorded programme is saved and will not be
overwritten by the new programme.

For the DVD deck

ONCE

(One Time Recording)

WEEKLY

(Weekly Recording)

MON-SUN

/

MON-SAT

/

MON-FRI

(Daily Recording)

VPS/PDC Recording

Now available from some TV stations, PDC (Programme Delivery
Control) and VPS (Video Programme System) are services
designed to assure safe, accurate timer recording. With this
system, special code signals are transmitted together with the
audio/video signals. These code signals control your video unit and
have precedence over the advertised times you may have preset
into the timer. This means that your unit will start and stop
recording when the preset TV programmes actually start and
end^even if the broadcast time of a preset TV programme is
changed.

NOTES:

Make sure to press VPS/PDC

j after completing timer

programming procedure to activate the VPS/PDC recording
function. The VPS/PDC recording indicator lights up on the front
display panel when VPS/PDC recording function is activated.
However, it will blink rapidly when VPS/PDC

j is pressed under

the following conditions:

Clock is not set.

Timer programming has not been set.

Disc is not loaded.

HDD is full.

When you use Manual Timer Programming, set the start time
(VPS or PDC time) exactly as advertised in the TV listing. A
different time than advertised will result in no recording.

VPS/PDC recording is also possible when a satellite receiver or a
cable system is connected to [L-2 IN/DECODER] connector on
your unit.

VPS/PDC recording is also possible via the [L-1 IN/OUT]
connector.

When timer recording via VPS/PDC recording is in progress, it is
not possible to switch between the HDD and DVD deck, and the
following menus cannot be displayed:

Main Menu

Library Database Navigation Menu

Editing Menu

If the unit is powered on when set to record a timer programme
onto HDD/DVD using VPS/PDC, the PDC information will not be
used. The programme will be recorded using the start and stop
times originally programmed.

How to check if the station being received transmits a VPS/
PDC signal
A Hold down DISPLAY for about 5 seconds. AVPS/PDCB appears

and blinks on the front display panel. If a VPS/PDC signal is
detected from the station,

AVPS/PDCB will stop blinking. If no

VPS/PDC signal is detected from the station,

AVPS/PDCB will

blink at a slower rate.

B Press DISPLAY again to return to normal display.

Overwritten

This week’s drama

Last week’s drama

Overwritten

This

week

Last

week

MON

TUE

WED

THU

FRI

MON

TUE

WED

THU

FRI

Overwritten

Tuesday’s programme

Monday’s programme

DX5SEU_00.book Page 45 Thursday, September 1, 2005 1:26 PM