JVC GET0126-001A - Manual (Page 9)

9
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
* When “CLOCK” is set to “ON” (see page 33),
the current indication will soon change to the
clock time.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
To search stations of
higher frequencies
To search stations of
lower frequencies
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Note:
FM1 and FM2: 87.5 MHz – 108.0 MHz
FM3: 65.00 MHz – 74.00 MHz
Selected band appears*.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
FM 1
(F1)
FM 2
(F2)
FM 3
(F3)
A M
EN09-12_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM 9