JVC GET0126-001A - Manual (Page 26)

26
ENGLISH
Refer also to “CD OPERATIONS” on pages 20 to
23.
Playing an MP3 disc
1
Open the control panel.
Notes:
• When an external component is connected to
the AUX input jack on the control panel, be
careful of handling a disc.
• When a CD is already in the loading slot,
pressing CD CD-CH (AUX) turns on the unit
and starts playback automatically.
2
Insert an MP3 disc into the loading
slot.
The unit turns on, draws
the disc and starts
playback automatically.
3
Close the control panel by hand.
All files will be played repeatedly until you
stop playback.
MP3 OPERATIONS
* When “CLOCK” is set to “ON” (see page 33),
the current indication will soon change to the
clock time.
Notes:
• MP3 discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
• When playback starts, folder and file names (or ID3
tags) will automatically appears. (See also page 27.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc play starts from where
playback has been stopped previously.
The display changes to show the following:
Ex.: When the disc contains 19 folders
and 144 MP3 files
Total file
number Total folder
number
CD–in indicator
Current source
indication*
MP3 indicator
EN24-29_KD-SX947R[EE]f.p65 1/10/03, 9:50 PM 26