JVC GET0126-001A User Manual

Page 11

ENGLISH

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).

Select the FM band (FM1 – 3) you
want to store FM stations into.

Each time you press the
button, the band changes as
follows:

Press and hold both buttons for
more than 2 seconds.

Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number buttons
—No.1 (lowest frequency) to No.6 (highest
frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.

“- -SSM- -” appears, then disappears
when automatic preset is over.

Manual preset

You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.

Ex.: Storing FM station of 88.3 MHz into the

preset number 1 of the FM1 band.

Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).

Each time you press the
button, the band changes as
follows:

Tune in to a station (in this example,
of 88.3 MHz).

To tune in to stations
of higher frequencies

To tune in to stations
of lower frequencies

CONTINUED ON THE NEXT PAGE

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M