JVC GV-PT1 - Manual (Page 34)

34
Printer Jam
If a print sheet gets stuck inside the printer,
follow these steps to remove it:
1 OPEN LID, REMOVE INK SHEET
CARTRIDGE
Move the slide knob in the direction of
the arrow. The lid springs open, so apply
gentle pressure to the top when opening
(
੬
pg. 10).
2 REMOVE PROBLEM SHEET
If the ink sheet, or a print sheet, is caught
in the roller and can’t be removed, close
the lid and shut off the printer’s power.
Then turn the power back on.
3 RE-INSTALL INK SHEET
CARTRIDGE, CLOSE LID
While holding the “ ” portion of the
ink sheet cartridge, position it at the
proper angle, insert and push in until you
hear it click (
੬
pg. 10).
Cleaning The Thermal Heads
The thermal heads may be in need of
cleaning. If the heads become covered with
dust or dirt, print quality will drop. Use a
cotton swab to clean the heads. If this doesn’t
remove the dirt, please consult your nearest
JVC dealer or Technical Service Center.
1 OPEN LID
See page 10.
2 CLEAN HEADS
Clean thoroughly using a clean cotton
swab. Using anything else could result in
scratches which could cause a head
malfunction.
3 CLOSE LID
See page 10.
CORRECTIVE ACTION
MIT SUBISHI DIGITAL COLOR PRINTER CP-GZ1
CAUTIONS:
● The thermal heads on the underside of the
door can become hot. Be careful not to
touch them when opening or closing the
door.
● It’s a good idea to turn off the printer’s
power and wait for a short time before
opening the door, to give the thermal heads
a chance to cool.