JVC GV-PT1 - Manual (Page 24)

24
Strobe Print
The printer stores a selected number of images at short intervals, and prints them on one sheet.
Preparation
● Connect the image source (camcorder, video cassette recorder) to the printer ( ੬
pg. 12).
● Install the ink sheet cartridge in the printer ( ੬
pg. 10).
● Plug in the printer and press POWER. The power comes on and the POWER ON Lamp lights.
ADVANCED PRINTING (cont.)
2 / 2
STROBE SPEED : HIGH
ID NUMBER : 20
LANGUAGE : ENGLISH
TO SELECT PUSH ( SELECT )
TO SET PUSH ( + , – )
PRINT MENU 1 / 2
PIX STABILIZER : OFF
MULTI PIX : 16
CONTENT : STROBE PIX
TO SELECT PUSH ( SELECT )
TO SET PUSH ( + , – )
PRINT MENU 1 / 2
PIX STABILIZER : OFF
MULTI PIX : 4
CONTENT : SELECTED PIX
TO SELECT PUSH ( SELECT )
TO SET PUSH ( + , – )
2
1 ACCESS PRINT MENU
Press MENU. The Print Menu appears.
2 SET PARAMETERS
Set “MULTI PIX” to “4” or “16”. Then set
“CONTENT” to “STROBE PIX”, and set
“STROBE SPEED” to either “HIGH” or “LOW”.
3 CLOSE PRINT MENU
Press MENU. The Print Menu disappears, and
selection is complete.
4 BEGIN SOURCE PLAYBACK
Fast-forward or rewind the source tape to
locate the desired scene, then start playback a
little before the scene.
Print Lamp
POWER
ON Lamp
MENU Button SELECT Button
Print Sheet Insertion Slot Print Sheet Exit Slot
MEMORY
Button
PICTURE
SELECT
Button
POWER
Button
SET Buttons