beautypg.com

Erasing all tracks—all erase, Erasing tracks—erase – JVC 0803AIMMDWJEM User Manual

Page 53

background image

50

English

6

Repeat steps

4

and

5

to select all the tracks

you want to erase.

• You can select up to 15 tracks. If you select a 16th track

to erase, “MEMORY FULL” will appear on the display.

7

Press ENTER.

8

Press ENTER.

“EDITING” appears on the display. Then
“WRITING” and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD.

Erasing All Tracks—ALL ERASE

This function allows you to erase all the tracks on an MD.
You cannot resume the erased tracks.

1

Insert an MD you want to edit into the MD
loading slot.

On the remote control ONLY:

2

Press TITLE/EDIT repeatedly
until “ALL ERASE?” appears on
the display.

• If you want to stop this editing process, press CANCEL.

3

Press SET.

• To cancel the setting, press CANCEL.

4

Press ENTER.

“EDITING” appears on the display. Then
“WRITING” and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD.
“BLANK DISC” appears on the display.

Erasing Tracks—ERASE

This function allows you to erase unwanted tracks.
You cannot resume the erased tracks.
Once tracks are erased, the other tracks and/or groups are
renumbered.
You can erase up to 15 tracks at a time.
• To stop any time during the editing process below before

step 8, press TITLE/EDIT.

1

Insert an MD you want to edit into the MD
loading slot.

On the remote control ONLY:

2

Press TITLE/EDIT repeatedly
until “ERASE?” appears on the
display.

• If the loaded MD has no track, “ERASE?” will not

appear.

• If you want to stop this editing process, press CANCEL.

3

Press SET.

4

Press

¢ or 4 to select

the track you want to erase.

• You can also select the track using

the number buttons. In this case,
the selected track starts playing repeatedly.

5

Press SET.

“ ” appears on the display.
The track marked with “ ” will be erased.

• When you do not want to erase the track, press

CANCEL to remove “ .”

Ex.: When track 5 is selected.

TITLE/EDIT

SET

GROUP SKIP

GROUP SKIP

SET

ENTER

ENTER

TITLE/EDIT

SET

ENTER

Continued

EN46-53_UX-J55MD[UB]f.p65

7/1/03, 4:45 PM

50

This manual is related to the following products: