JVC 0803AIMMDWJEM - Manual (Page 44)

41
English
Dividing a Group—DIVIDE GR
This function allows you to divide one group into two
separate groups.
You cannot divide the group containing only a single track.
When the original group has a title, two separate groups are
reassigned the same title as the original group.
Once a new group is divided, the other groups are
renumbered.
• To stop any time during the editing process below before
step 7, press GROUP TITLE/EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE/EDIT
repeatedly until “DIVIDE GR?”
appears on the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has no group, you cannot go to the
following steps.
• During playback:
The current playing track number and its group number
will appear. If the track does not belong to any group,
the group number will be indicated as “– –.”
4
Press GROUP SKIP
¢ or GROUP SKIP
4 while holding SHIFT to select the group
you want to divide.
GROUP TITLE
/EDIT
GROUP SKIP GROUP SKIP
SHIFT
5
Press
¢ or 4 to select
the track as the dividing
point.
The track selected in this step will
be the first track in the divided group.
• You can also select the track using the number buttons.
In this case, the selected track starts playback
repeatedly.
• You cannot select the first track in a group or an
ungrouped track as a dividing point.
6
Press SET.
• To cancel the setting, press CANCEL, then repeat from
step 4.
7
Press ENTER.
“EDITING” appears on the display. Then
“WRITING” and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD and playback stops.
To join the divided groups, see the JOIN GR function on
page 42.
GROUP SKIP GROUP SKIP
SET
ENTER
SET
The first track of the selected group
Ex.: When group 2 is selected.
Ex.: When track 18 is selected.
EN37-45_UX-J55MD[UB]f.p65 7/1/03, 4:46 PM 41