JVC 0803AIMMDWJEM - Manual (Page 42)

39
English
In the following examples of group editing, the process is
explained from the very first—that is, inserting a disc. You
can also edit an MD during playback (in Normal Play).
Forming a Group—FORM GR
This function allows you to form a group from a series of
tracks which do not belong to the other groups. You can form
a group from a single track.
Once a new group is formed, the other groups are renumbered.
• You can form up to 99 groups on a single MD.
• To stop any time during the editing process below before
step 8, press GROUP TITLE/EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE/EDIT
repeatedly until “FORM GR ?”
appears on the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• During playback:
The currently playing track number starts flashing.
4
Press
¢ or 4 to select
the first track of a new
group.
• You can also select the track using
the number buttons. In this case, the selected track starts
playback repeatedly.
GROUP TITLE
/EDIT
SET
GROUP SKIP GROUP SKIP
5
Press SET.
• If the track selected as the first track
belongs to another group, “GROUP
TRACK” appears on the display.
Select another track again (repeat step 4 ).
• If you want to form a group from the selected track
only, go to step 7.
• To cancel the setting, press CANCEL, then repeat from
step 4.
6
Press ¢ or 4 to select
the last track of the new
group.
• You can also select the track
using the number buttons. In this case, the selected track
starts playback repeatedly.
7
Press SET.
• If the last selected track belongs to another group,
“GROUP TRACK” appears on the display.
Select another track again (repeat step 6 ).
• To cancel the setting, press CANCEL, then repeat from
step 4.
8
Press ENTER.
“EDITING” appears on the display. Then
“WRITING” and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD and playback stops.
To dissolve the group, see the UNGROUP function on page
44.
When “CANNOT FORM!” appears on the display in
step
7
You are trying to form a new group which includes another group between
the first and the last track. In this case, dissolve the previous group and form
a new one again.
SET
GROUP SKIP GROUP SKIP
SET
ENTER
Ex.: When track 3 is selected.
Ex.: When track 5 is selected.
EN37-45_UX-J55MD[UB]f.p65 7/1/03, 4:46 PM 39