JVC 0803AIMMDWJEM - Manual (Page 48)

45
English
Erasing Tracks in a Group—ERASE GR
This function allows you to erase a group together with tracks
in the group.
You cannot resume the tracks in the erased group.
Once a group is erased, the other tracks and groups are
renumbered.
• To stop any time during the editing process below before
step 6, press GROUP TITLE/EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE/EDIT
repeatedly until “ERASE GR ?”
appears on the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has no group, you cannot go to the
following steps.
• During playback:
The group number of the currently playing track will
appear. If the track does not belong to any group, the
group number will be indicated as “– –.”
4
Press GROUP SKIP
¢ or GROUP SKIP
4 while holding SHIFT to select the group
you want to erase.
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from
step 4.
6
Press ENTER.
“EDITING” appears on the display. Then
“WRITING” and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD.
GROUP TITLE
/EDIT
SET
GROUP SKIP GROUP SKIP
SHIFT
SET
ENTER
Ex.: When group 6 is selected
EN37-45_UX-J55MD[UB]f.p65 7/1/03, 4:47 PM 45