JVC 0597TOV*UN*SN - Manual (Page 32)

32
EN
+
PLAYBACK Using The Cassette Adapter
Cassette Adapter
Use this to play back a S-VHS-C/VHS-C video cassette
recorded with this camcorder. It is fully compatible with
any S-VHS/VHS video cassette recorder. The C-P7U
adapter is battery powered and automatically performs
tape loading and unloading.
INSERT BATTERY
1
Slide the battery cover up to remove it, and install
one “R6(AA)” size battery as shown in the
illustration at left. Then reattach the cover.
INSERT CASSETTE IN ADAPTER
2
Slide the latch to open the adapter compartment
door, then insert the cassette and close the
compartment door.
PLAY BACK ON CONNECTED VCR
3
Load the cassette adapter into the VCR and play the
tape back as you would any other.
REMOVE CASSETTE FROM
ADAPTER
4
Slide the latch and the compartment door opens
automatically. Then insert your finger in the hole on
the underside of the adapter as shown in the
illustration at left, push up and remove the cassette.
NOTES:
● During tape loading and unloading, do not touch the
reels for safety and tape protection.
● Tapes recorded in S-VHS cannot be played back on
regular VHS VCRs.
● During special-effect playback (slow motion, still
frame, etc.), the picture may vibrate or noise bars may
appear on the screen.
● To record on a VCR using a compact cassette and the
adapter, cover the adapter’s recording safety hole with
adhesive tape.
VCR
Compartment door
Recording safety hole
Reels
Compact video cassette
Sliding latch