JVC 0597TOV*UN*SN - Manual (Page 13)

EN
13
APS ON APS OFF
AUTO
P AUSE
APS ON
Down
Record-Standby Record
Record-Standby
Record-Standby
Normal Upside down
Up
FEATURE: Auto Pause System
PURPOSE: To automatically stop recording
when the camcorder is pointed
down, preventing accidental
recordings of the ground, your feet,
etc.
OPERATION: 1) Press AUTO PAUSE so that “APS
ON” appears in the viewfinder for
2 seconds. When the camcorder is
tilted down by a large degree from
its horizontal position during
recording, the Record-Standby
mode is automatically engaged.
During this, “AUTO” is displayed
above “
PAUSE
”.
• To switch off the Auto Pause
System, press AUTO PAUSE
again so that “APS OFF” appears
in the viewfinder for 2 seconds.
NOTES:
● The Auto Pause System is also
effective when the camcorder is
pointed up, or is positioned upside
down.
● Auto Pause also works when the
camcorder is twisted by a large
degree to the left or right.
● When you want to shoot in any of
the aforementioned positions, be
sure to switch off Auto Pause.
FEATURE: Quick Rec
PURPOSE: To record a scene for 5 seconds,
providing quick scene transitions like
those seen in TV programmes.
OPERATION: 1) During Record–Standby, press and
release QUICK REC. Recording
starts, and after 5-second record-
ing is finished, the camcorder
reenters the Record–Standby mode
automatically.
• To continue shooting longer than
5 seconds, press and hold
QUICK REC. Recording
continues as long as QUICK REC
is kept pressed.
NOTES:
● The Fade/Wipe (
੬
pg. 19) cannot
be activated by pressing QUICK
REC.
● QUICK REC cannot be used during
Animation and Time-Lapse
(
੬
pg. 27).
AUTO PAUSE
QUICK REC