Getting started, Provided accessories, How to attach the lens cap – JVC GR-D225 User Manual
Page 5: How to attach the shoulder strap
EN
5
MasterPage: Start_Right
a AC Adapter AP-V14E or AP-V15E
b Power Cord
c Battery Pack BN-V408U-B
d Audio/Video Cable (ø3.5 mini-plug to RCA plug)
e Core Filter (for optional S-Video Cable. ੬ pg. 6 for
attachment)
f Shoulder Strap (See the right column for attachment)
g Lens Cap (See the right column for attachment)
h Cable Adapter
NOTES:
● In order to maintain optimum performance of the
camcorder, provided cables may be equipped with one or
more core filter. If a cable has only one core filter, the end
that is closest to the filter should be connected to the
camcorder.
● Make sure to use the provided cables for connections. Do
not use any other cables.
How To Attach The Lens Cap
To protect the lens, attach
the provided lens cap to
the camcorder as shown
in the illustration.
NOTE:
To confirm the lens cap is on
correctly make sure the cap
is flush to the camcorder.
How To Attach The Shoulder Strap
Follow the illustration.
1
Thread the strap through the eyelet.
2
Fold it back and thread it through the strap guide and
the buckle.
● To adjust the length of the strap, loosen and then tighten
the strap in the buckle.
3
Slide the strap guide fully towards the eyelet.
Provided Accessories
or
Push.
Place here during
shooting.
1
2
3
Strap guide
Buckle
Eyelet
GR-D225EX.book Page 5 Friday, November 26, 2004 5:18 PM