beautypg.com

Auto focus, Manual focus, Pg. 21), t – JVC GR-D225 User Manual

Page 21

background image

FEATURES FOR RECORDING

ADV

A

N

C

ED

F

EA

T

UR

ES

EN

21

MasterPage: Advan_Right

The camcorder’s Full Range AF
system offers continuous shooting
ability from close-up (as close as
approx. 5 cm to the subject) to
infinity.
However, correct focus may not be
obtainable in the situations listed
below (in these cases perform
“Manual Focus”):

● When two subjects overlap in the

same scene.

● When illumination is low.*

● When the subject has no contrast (difference in brightness

and darkness), such as a flat, one-colour wall, or a clear,
blue sky.*

● When a dark object is barely visible in the LCD monitor or

the viewfinder.*

● When the scene contains minute patterns or identical

patterns that are regularly repeated.

● When the scene is affected by sunbeams or light reflecting

off the surface of a body of water.

● When shooting a scene with a high-contrast background.
* The following low-contrast warnings appear blinking:

,

,

and

NOTES:

● If the lens is smeared or blurred, accurate focusing is not

possible. Keep the lens clean. (

੬ pg. 34) When

condensation occurs, wipe with a soft cloth or wait for it to
dry naturally.

● When shooting a subject close to the lens, zoom out first.

(

੬ pg. 10) If zoomed-in in the auto focus mode, the

camcorder may automatically zoom out depending on the
distance between the camcorder and the subject. This will
not occur when “TELE MACRO” is set to “ON”. (

੬ pg. 15)

NOTE:

If you are using the viewfinder, you should already have
performed “Viewfinder Adjustment” (

੬ pg. 8).

1

Set the Power Switch to “M”

while pressing down the Lock
Button located on the switch.

2

Press FOCUS. The manual

focus indicator appears.

3

To focus on a further subject,

rotate the MMENU/VOL. Wheel
towards “+”. The “

” indicator

appears and blinks.

To focus on a nearer subject,
rotate the MMENU/VOL. Wheel
towards “–”. The “

” indicator

appears and blinks.

To reset to Auto Focus
Press FOCUS twice or set the
Power Switch to “A”.
If FOCUS is pressed once, the
camcorder will enter the focus
adjustment mode again.

NOTES:

● Be sure to focus the lens in the maximum telephoto position

when you use the Manual Focus mode. If you focus in on a
subject in the wide-angle position, sharply focused images
cannot be obtained when zoomed up because the depth-
of-field is reduced at longer focal lengths.

● When the focus level cannot be adjusted any further or

closer, “

” or “

” will blink.

Auto Focus

Power Switch

SNAPSHOT

Lock Button

FOCUS

MMENU/VOL.

Focus detection zone

Manual Focus

Manual focus indicator

While focusing on a

further subject

Manual focus indicator

While focusing on a

nearer subject

GR-D225EX_07Advanced.fm Page 21 Tuesday, November 30, 2004 5:56 PM