beautypg.com

Features for recording, White led light, Night scope – JVC GR-D225 User Manual

Page 18

background image

18

EN

MasterPage: Heading0_Left

FEATURES FOR RECORDING

White LED Light can be used to brighten the subject in
the dark place during video recording.

1

Press LIGHT repeatedly to change the setting.

OFF: Turns off the light.
ON: The light is on always. (

appears.)

AUTO: The light turns on automatically when dark.
(

appears.)

2

Press the Recording Start/Stop Button to start video

recording or SNAPSHOT to shoot a still image.

NOTES:

● Be careful not to point the LED Light directly to eyes.

● If the light does not reach the subject, the Night-Scope

function will be activated, and makes it possible to shoot
the subject brighter.

● There is a difference in the brightness of the images shot

between the centre area which is illuminated by the LED
Light and the surrounding areas (which will be darker).

● Since subjects are shot at a reduced shutter speed when

the White LED Light setting is “ON”, they will appear slightly
blurred.

Makes dark subjects or areas even brighter than they
would be under good natural lighting. Although the
recorded image is not grainy, it may look as if it is
strobing due to the slow shutter speed.

1

Set the Power Switch to “M” while pressing down the

Lock Button located on the switch.

2

Open the LCD monitor fully. (

੬ pg. 10)

3

Press NIGHT so that the Night-Scope indicator “

appears.

● The shutter speed is automatically adjusted to provide up to

30 times sensitivity.

● “ ” appears beside “

” while the shutter speed is being

automatically adjusted.

To deactivate Night-Scope
Press NIGHT again so that the Night-Scope indicator
disappears.

NOTES:

● During Night-Scope, the following functions or settings

cannot be activated and its indicator blinks or goes out:
• Some modes of “Program AE With Special Effects”

(

੬ pg. 19).

• “GAIN UP” in CAMERA Menu. (

੬ pg. 15)

• “DIS” in MANUAL Menu. (

੬ pg. 15)

● During Night-Scope, it may be difficult to bring the

camcorder into focus. To prevent this, use of a tripod is
recommended.

White LED Light

Lock Button

SNAPSHOT

Power Switch

NIGHT

LIGHT

White LED Light

Recording Start/Stop Button

Night Scope

GR-D225EX.book Page 18 Friday, November 26, 2004 5:18 PM