JAI M4+ CL - Manual (Page 28)

CV-M4 + /M4 + CL, CV-M7 + /M7 + CL
9.2. Specification table
Specifications CV-M4+/CV-M4 + CL CV-M7+/CV-M7 + CL
Scanning system Progressive 1060 lines 24 frames/sec.
Pixel clock 40.49 MHz 40.49 MHz
Line frequency
Line freq. with V binnig 25.43 kHz (1592 pixel clock/line)
25.11 kHz (1752 pixel clock/line) 25.43 kHz (1592 pixel clock/line)
-
Frame rate for full frame
Frame rate for V binning 24 frames/sec. (1060 lines/frame)
44 frames/sec. (565 lines/frame)
24 frames/sec. (1060 lines/frame)
-
CCD sensor 2/3” progressive scan monochrome
IT CCD (ICX285AL)
2/3” progressive scan RGB primary color
(Bayer filter) IT CCD (ICX285AQ)
Sensing area 8.9 (h) x 6.6 (v) mm
Cell size 6.45 (h) x 6.45 (v) µm
Effective pixels 1392 (h) x 1040 (v)
Pixels in video output
Full
V binning
1/2 partial
1/4 partial
1/8 partial
1380 (h) x 1030 (v) 24 frames /sec.
1380 (h) x 515 (v) 44 frames/sec.
1380 (h) x 512 (v) 44 frames/sec.
1380 (h) x 256 (v) 70 frames/sec.
1380 (h) x 128 (v) 102 frames/sec.
1380 (h) x 1030 (v) 24 frames /sec.
-
1380 (h) x 512 (v) 44 frames/sec.
1380 (h) x 256 (v) 70 frames/sec.
1380 (h) x 128 (v) 102 frames/sec.
Sensitivity on sensor 0.1 Lux (Max. gain, 50% video) 0.1 Lux (Max. gain, 50% video)
S/N ratio >57 dB >57 dB
Video A/D conversion 10 bit
Video output digital 8 bit in LVDS (EIA 644). 10 bit in Camera Link. (CL versions)
Video output analogue 0.7 Vpp, 75 Ω (For test only)
Gamma 1.0
Gain
Gain range
Manual
-3 to +12 dB
Synchronization Int. X-tal. Ext. random trigger
Sync. output *) Composite 4 Vpp from 75 Ω
Trigger input TTL *) 4 V ±2 V
EEN output *) 4 Vpp from 75 Ω
Pixel clock output
LEN output
FEN output
Trigger input *)
Multiple exposure *)
LVDS or Camera Link
LVDS or Camera Link
LVDS or Camera Link
TTL, LVDS or Camera Link
TTL, LVDS or Camera Link
Trigger modes Continuous, Edge pre-select, Pulse width control, Frame delay, Reset Continuous
Trigger
Trigger input (Edge pre-s) >2 H to < 4000 H. (H synchronous H a-synchronous accumulation)
Shutter speed (fixed) 1/24, 1/50, 1/100, 1/200, 1/400, 1/800, 1/1500, 1/3000, 1/5000, 1/10,000 s
Pulse width control 2 H to ∞. (80 µsec. to ∞) <2 second is recommended
Frame-delay readout Fixed shutter speeds. Delay ≤3 frames
Smearless readout Edge pre-select, PWC and frame delay
Multiple exposure
Interval between exp. ≤6 fixed exposures in frame-delay readout.
Fixed shutter time + 1H (40 µsec.)
Switches on rear Shutter, trigger, scanning, smearless, RS 232C control
Functions controlled by
RS 232C Shutter, Trigger, Scanning, Readout, Trigger input, Select/polarity, LEN/FEN/EEN
polarity, Video level, Set-up level and Gain
Operating temperature -5°C to +45°C
Humidity 20 – 80% non-condensing
Storage -25°C to 60°C 20 to 90% non-condensing
Power 12V DC ± 10%. 3.3 W
Lens mount C-mount
Dimensions 40 x 50 x 90 mm (HxWxD)
Weight 250g
*) Alternative inputs or outputs
- 27 -