JAI M4+ CL - Manual (Page 13)

CV-M4 + /M4 + CL, CV-M7 + /M7 + CL
6.3. Continuous Operation (Non triggered)
Mode settings can be done with either RS-232C or switches. Trigger Mode Normal. TR=0. It is for
applications where the camera is continuous running without external trigger. The shutter mode
can be normal or programmable exposure. (SM=0, SM=1). The shutter will work in all 10 steps up
to 1/10,000 second or with the programmable exposure in 1056 steps. In partial scanning and
binning modes (M4
+ and M4CL + only), shutter times longer than the actual frame time has no
meaning. The exposure will be equal the frame time. Fig. 16. show horizontal timing details,
and Fig. 17. through 18. shows vertical timing details with binning and partial scanning.
To use this mode:
Set function:
Trigger mode TR=0
Shutter mode “Normal” or “Programmable” SM=0, SM=1
Polarity and other functions
Fig. 16. Horizontal timing details.
Fig.16A. Horizontal timing details with V binning.
- 12 -